Woodworking 101: Everything You Need To Know

Woodworking is a great activity for people who think they are good with their hands. Woodworking is an art-form that spans the centuries. This article will give you ideas on how to get better at woodworking.

Always make safety first with a woodworking project. Always wear safety equipment and use tools the proper way. Avoid taking off the guards on power tools; they are meant to protect you. The last thing you want to do is end up at the emergency room because of an accident.

Try making reusable sanding blocks by yourself. Cut six blocks from any 3/4″ plywood you have, for each sandpaper grit you regularly use. Be sure that they’re only around 2.5″ x 4.75″. Apply spray adhesive to both the blocks and the cork tiles. Stick a block to the cork, making sure to cut the cork flush with a utility knife. After spraying adhesive on a sheet of sandpaper, place it on the block face of each cork. Lastly, cut the sandpaper flush with the cork, and label each block.

How high your workbench is truly affects the quality of your work. Measure from the floor to your waist. That height is optimal for your workbench.

Before you begin, have a budget in place so you will know the limits of your project. Often times your ideas are bigger than your wallet with woodworking projects. It can be disappointing to find out that the money isn’t there after you have already completed half of the project. This is why you should do some homework before starting to avoid surprises in the future.

When you want to cut narrower sections of wood, never use your own fingers to guide them. Use a strip of wood instead to maximize safety. This will ensure that you keep all ten of your fingers, which are all necessary for you to continue working with wood.

Tin Snips

Use tin snips if you are working with laminate. These snips make it simple to trim down the laminate to a perfect size. Use the tin snips for laminate only so they stay sharp.

Dry fit your project together before beginning to glue. If you try to adjust things after the glue has been applied, there is a huge chance that you will end up causing some damage. Using dry-fit will show you where to put the pieces should go.

Be certain you use the right nail size for any project. If you use a nail too big for the task, it may split the wood, ruining the piece. Small nails won’t give a good bond. You have to figure out what the right size is for the job you are doing.

Do you have a hard to reach screw that needs tightened, but there isn’t room for your hand and the screwdriver? You can solve this problem. Get a screwdriver with a long handle and a socket that is 12 point. Fit the socket over the end of your screwdriver; then attach it to a ratchet.

Never stick with tape measures alone. Story sticks can help you out and it’s wise to slowly work up to the cut you want. Just cut scrap wood so you can dry fit the piece. Having variety in the ways you can cut will stave off boredom.

Go on the search for recycled wood. A lot of places that use or work with wood often throw out pieces that you can use. You may be surprised to learn that many home improvement stores or other types of businesses that use wood will simply throw out any wood they don’t use. Use this to your advantage and keep an eye out for pieces you can use. You will find in time that you are saving a good deal of money on each project.

Woodworking is a very rewarding hobby. Now that you’ve read a bit about woodworking, you are hopefully ready to get started on your own wood pieces. This article’s tips will eventually make you an expert.


Bookmark and Share